Pymeter PY-19D Temperature Difference Controller Thermostat for recycle pump hot water recycle control system
Original price was: $42.00.$32.00Current price is: $32.00.
Differential Temperature Controller is widely used in hot water recycle control system. PY-19D is assembled with dual sensors, fetching temperature difference from high temperature area and low temperature area. According to the 2 set temperature difference values,it controls 2 sockets output to keep water at desired temperature difference.
- Description
- Size Guide
- Additional information
- Reviews (5)
Description
Description
Overview
PY-19D can switch on/off relay according to set temperature difference. The temperature in high temperature area must be higher than that in low temperature area, otherwise the display value is negative. ON Temperature Difference must be greater than OFF Temperature Difference, otherwise it can not be set.
For example, ON Temperature Difference is set to 10°C, OFF Temperature Difference is set to 5°C, while current Temperature Difference is higher than 10°C, relay connects, recycle pump starts working; While current Temperature Difference is lower than 5°C, relay disconnect, recycle pump stops working.
Main Features
- Designed with dual power sockets, just Plug & Play;
- Dual relay, able to set 2 Temperature Difference values and control 2 socket output;
- Can dynamically display Temperature Difference, Temperature in High Temperature area, Temperature in Low Temperature area, ON Temperature Difference and OFF Temperature Difference in turn;
- With manual start-up function,when the Temperature Difference does not reach the ON value, press the start-up key and relay will output immediately;
- Settings are retained even when power off.
Specification
Temperature Difference Range: -9°C~99°C
Control Range: 0°C~60°C
Temperature Resolution: 0.1°C
Temperature Accuracy: ±1°C
Control Mode: On/Off Output
Input Power: 220VAC, 50/60Hz
Output Power: 220VAC, MAX 10A
Sensor Type: NTC Sensor x 2
Controller Dimension: 210x55x40 mm
Sensor Cable: 2m / 6.56ft
Input Power Cord: 1.35m / 4.5ft
Functions
- Power ON-OFF for recycle pumps via 2 outlets: when current temperature difference(between 2 sensors) is above power-ON setpoint, socket1(2) will power on, when current temperature difference is below power-OFF setpoint, socket1(2) will power off. power-ON setpoint and power-OFF setpoint for each output could be set to different value, but power-ON setpoint must be greater than power-OFF setpoint;
- Manual Switch ON-OFF: when not reach setpoint, can manual switch on-off power via INCREASE key(socket1) and DECREASE key (socket2);
- Dynamically display Temperature Difference (fixed for 1st row display), Temperature in High Temperature area, Temperature in Low Temperature area, ON Temperature Difference and OFF Temperature Difference in turn.
Size Guide
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
Additional information
Additional information
| Weight | 0.632 kg |
|---|---|
| Dimensions | 26 × 11 × 9 cm |
Reviews (5)
5 reviews for Pymeter PY-19D Temperature Difference Controller Thermostat for recycle pump hot water recycle control system
Add a review
You must be logged in to post a review.
Stuart –
Received in good condition, works perfectly, wine in short days, very satisfied with the purchase.
Luke –
I got a very good quality product compared to its price! Thanks!
Maurelle Allard –
Everything is clear. Works from 220 V. Shows the same. The length of the sensors is 2 meter each. very nice product
Coen Jacobs –
The parcel was tracked, and came in two weeks after the order to chelyabinsk. It's very fast. Unexpectedly nice.
Cobus Bester –
Tested and work perfectly.